- 1
- Builds
- 23
- Updates
- 0
- Reviews
- 0
- Forum
Published builds
Latest work
- Wrap-up — what I'd changeFoundry — two-way standmount monitors
Calling it finished at v1.2. If I built it again: a bigger port flare to kill the last bit of chuff, and I'd veneer before routing the recesses to…
- Final measurements + REW sweepsFoundry — two-way standmount monitors
Full spin done. On-axis ±1.4 dB 300 Hz–15 kHz, the off-axis curves are smooth, distortion is below 0.5% across the band at 90 dB. I'll attach the REW…
- Stands built from offcutsFoundry — two-way standmount monitors
Made a pair of simple stands from the birch offcuts, filled the columns with sand. Gets the tweeters to ear height and kills the desktop bounce a bit.
- Port tuning measurementFoundry — two-way standmount monitors
Nearfield port + woofer measurement confirms the tuning landed at 45 Hz, basically on target. Trimmed 4 mm off each port to nudge it. Group delay is…
- Final crossover on a proper boardFoundry — two-way standmount monitors
Transferred the voiced network from perfboard to a real mounting board, point-to-point with the good caps. Hot-glued everything down so nothing…